challenge

Current ink jet cartridge mold design/cycle
time does not yield sufficient parts

current mold/ part characteristics

Conventional: 4 cavity
Current Cycle Time: 38 sec

part details

Weight: 20.0 g
Nominal Thickness: 2.40mm
Material: PETG 15% GR

evaluation

1- Part analysis used to determine
optimal curing time using Ritemp™
2- Projected NEW cycle time
reduction of 15 seconds
3- New stack design by Ritemp™

Ritemp™ benefits

1. 45% reduction in cycle time
2. 17 second per cycle savings
3. Cooled with 3GPM’s per mold half
4.Tolerance CPK improved 40%